Options

Options

The DYFA New York system contains endless possibilities, and there can be added a number of elements to the system to give it a unique look, which also enhances the aesthetics. Only your imagination sets the limits. Feel free to write to us here(link) with questions and wishes, and we will guide and advise you on the best solution to your project.

Read more about the additional options below:

DYFA New York system with different window glass tiles.

DYFA New York system in NCS S 4000-N gloss 5

Glass partition

DYFA New York i RAL 7047

DYFA New York system i RAL 7022 gloss 30

Colours and fillings

Colours

The DYFA transoms and aluminium profiles are powder coated with RAL 9005 gloss 03, fine structure, which gives the system its wrought-iron appearance.

DYFA stock raw profiles for alternative RAL colour coatings, and thus the system can be taken into many different design directions, complementing the wants and aesthetics of the interior design.

Fillings

As standard, the DYFA New York system is made with glass fillings of 6 or 8 mm toughened safety glass. If you wish to add a certain ambience to the room, this can be done by applying alternative fillings with different colours and textures.

The customisation options are endless and DYFA can deliver alternative fillings of for example rippled decorative glass, mirror glass or frosted glass. Likewise, you can venture in completely different directions and replace the glass fillings with alternative materials such as sound reducing boards or wood.

The DYFA systems can likewise be delivered with soundproof glass, which lowers the noise level. This can be an advantage in large office spaces where the noise level can affect your employees negatively.

DYFA New York system with windows glass tiles

DYFA New York system with mirror

Interior doors

DYFA New York hinged door with mirror

Pull handles. Black aluminium, oak, smoked oak, brass, stainless steel and a combition with black aluminium and oak.

Pull handle Ø20 mm

Pull and lever handles

Pull handles

DYFAs pull handles can be added to pivot and hinged frame doors.

The pull handles are available in black aluminium, oak, smoked oak, brass, stainless steel, and a combination of black aluminium with oak or smoked oak. They are all available in Ø42 mm. The black and brass handles are also available in Ø30 and Ø20 mm.

All pull handles are delivered with black knobs and fittings for fastening on the door leaf. The instructional video for mounting the pull handles can be viewed here

Lever handles

For DYFAs hinged frame doors, there can be added lever handles and escutcheons in black and stainless steel. Other handles can be acquired if requested.

Feel free to write to us here if you have specific wishes or questions, and we will guide and advise you to the best solution to your project.

Black glass frame door, with Frost black lever handle and escutcheon

Conccealed hinged

Conccealed hinged

Hinges and door closers

Concealed hinges

DYFAs New York doors can be delivered with a concealed hinged, that is completely concealed when the door is closed. The concealed hinge has the advantage of being adjustable in all directions, which makes it easier to readjust the doors if it is needed.

Additionally, the concealed hinge gives a purer and more minimalistic look, since the focus is on the clean lines which no longer are broken.

Door closers

DYFA offers several types of door closers, both visible and concealed. With a door closer you can adapt the door to fit your needs. The door closer is adapted to the door, so it both can keep it open and ensure that it closes by itself. This can be an advantage in offices where there is a lot of traffic through the doors, and where it is not everybody that remembers to close the doors after themselves.

Top concealed door closer

Floor mounted door closer

Hydraulic Patch Fitting for P3 pivot door

Fake add-on transoms: New York and flat contour Copenhagen

Fake transoms

Add-on fake transoms for full glass solutions

Besides the module system, the assortment also encompasses New York solutions to conventional full glass partition walls built of large complete glass sheets, where the New York add-on fake transoms can be added. This add-on solution can be added to the existing interior as well as exterior glass solutions.

The glued add-on transoms are sold by the meter and are available in two variations:

  • Profiled “New York” transoms (35 mm x 16 mm)
  • Straight contour “Copenhagen” transoms (35 mm x 3 mm)

Transoms- and wall-mounted shelf system

Transom-Mounted Shelf System

The DYFA transom shelf can be added directly on the glass walls on the New York transom with DYFAs shelf supports. The shelf supports have a range of 6 mm and the standard shelf is made with 6 mm toughened safety glass with a depth of 150 mm. The maximum c/c length between each shelf support is 500 mm. The length of the shelf is customised according to specific measures with a maximum length of 1500 mm. The shelves have a maximum weight capacity of 5 kilograms.

New York transom mounted shelf supports in black aluminium with 6 mm glass shelves 150 × 300 mm

New York transom mounted shelf supports in black aluminium with 6 mm glass shelves 150 × 300 mm

New York transom mounted shelf supports in black aluminium with 6 mm glass shelves 150 × 300 mm

Wall-mounted wall shelf system. 3 metres long glass shelves of 8 mm toughened safety glass

Wall-mounted wall shelf system. 3 metres long glass shelves of 8 mm toughened safety glass

Wall-mounted wall shelf system. 3 metres long glass shelves of 8 mm toughened safety glass

Wall-Mounted Shelf System

The DYFA wall shelf consists of square aluminium bars with shelf supports. The shelf system is made to custom measures. The shelf supports have an adjustable range up to 20 mm and thus they can be adapted to many different shelf types and material thicknesses.

The standard shelf is made with 8 mm toughened safety glass with a depth of 300 mm. Maximum c/c length between each shelf support is 1000 mm. The length of the shelf is customised according to specific measures with a maximum length of 3000 mm. The shelves have a maximum weight capacity of 10 kilograms.

Wine spine

Wine spine with bottleneck holes made of solid oak. It is available in oak or smoked oak.

The wine spine is delivered with black knobs and a fastening kit for wall mounting. It is Ø42 mm, with a length of 580 mm and a maximum weight capacity of 10 bottles.

Oak wine spine with black knobs and 10 bottleneck holes